Send inquiry
1, Forming process
De-coiler— Servo feeding— Gap and cut off mould— Forming ---collection table
2, Flow diagram
3, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
4, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
2, Feeding: Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
De-coiler— Servo feeding— Gap and cut off mould— Forming ---collection table
2, Flow diagram
3, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
4, Technical parameter of equipment main parts
1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
2, Feeding: Power 0.37kw
3, Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
|
NO. |
Project |
Unit |
parameters |
Remark |
|
|
1 |
Material |
type | Mild steel Galvanized sheet | ||
| Strength of material sheet | Map | ≥350 | |||
| Thickness of material sheet | mm | 0.8~1.5 | |||
| 2 | Size of production |
mm | Reference the picture |
||
| 3 | Production speed | m/min | 6~8 | ||
| 4 | Material of roller | GCr quenching treatment |
|||
| 5 | Drive type | Gear box | |||
| 6 | Power | kw | About 34 | ||
| 7 | Electric control system | PLC variable frequency control | |||
| 8 | Dimensions(Length*width*height) |
m | 28X4X3.9 | ||